Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector Wheel! 

The wheel has three statuses: Dirty, Running, and Clean!

The cover can be difficult to snap into place. I find that rocking the cover back and forth over the pin boss can help.

The spring is also a tight fit. A flat head screwdriver will easily force the part into place, though.

All parts are designed to be printed in PLA and without support material.

• Recommended layer height is 0.2mm
• Recommended infill percentage 20%
• Recommended to print the spring at a layer height of 0.1mm for maximum layer adhesion