Naar de inhoud
Inloggen
Vervangende radiatorknop voor ventiel met M30x1,5-schroefdraad1 / 3

Wat heb je nodig?

Naast de geprinte onderdelen:

  • 1×Muntje van 10 of 20 cent (of stalen plaatje van Ø 20 mm)

Beschrijving van de maker

Origineel in het Engels

Simple knob for radiotar valve with outer thread M30x1,5. On the inside top there is a recess with diameter of 20 mm and depth about 1 mm. This recess is intended for a flat piece of steel or any hard material to be placed so as to distribute the force from the valve pin better. A 10 or 20 cent coin fits the recess quiet well.

I recommend printing the model in the original orientation.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.18

Infill:

25 %

Filament: Filament PM ABS White

Category: Replacement Parts

Geprint door de community

Bij de bron al 11 keer geprint. Laat hier als eerste zien hoe het bij jou werd.

Reacties 0

Log in om een reactie te plaatsen.

    Nog geen reacties. Heb je dit geprint? Laat weten hoe het ging.

    Ook handig in reparatie

    meer zoals dit